New Construction Buyer's Agent in Columbus, Georgia and Phenix City, Alabama


Matt Horne, REALTOR® | Coldwell Banker Kennon & Parker

Matt Horne is a new construction REALTOR® with Coldwell Banker Kennon & Parker who represents buyers building semi-custom homes in Columbus, Georgia; Smiths Station and Salem, Alabama; Phenix City, Alabama; and Harris County, Georgia. Matt Horne has closed 19 new construction sales since October 2017. On 11 of them he represented the builder, and on 8 he represented the buyer.¹ Few buyer's agents have sat on both sides of the builder's table, and that is what makes Matt Horne different.

Call or text Matt Horne at 706.341.9196 before your first model home visit.


Do You Need a Realtor to Build a New Home?

Yes. Bring your own buyer's agent, and bring one before you walk into the model home.

The friendly agent in the builder's sales office represents the builder. That agent is paid to sell the builder's homes at the builder's price, on the builder's contract, with the builder's lender. None of that is a secret, but most first-time new construction buyers don't realize it until after they've signed.

Matt Horne has represented builders on 11 new construction sales in Lee County and Russell County, Alabama. He knows what a builder's agent is there to protect: the base price, the upgrade margin, the closing timeline and the builder's contract. As a buyer's agent, Matt Horne uses that knowledge to negotiate, review and inspect on behalf of the buyer.

Register Matt Horne as your agent on your very first visit or online inquiry. If you're working with Matt Horne, or any buyer's agent, tell the builder's sales representatives on your first visit or inquiry. Most builders in the Columbus and Phenix City area cover the buyer's agent compensation. Matt Horne confirms the arrangement in writing before you sign.


To-Be-Built Home or Quick Move-In Spec Home?

New construction buyers in the Chattahoochee Valley usually choose between two paths:

  • To-be-built (or "dirt build") semi-custom homes. You choose the floor plan, the structural options and the design center finishes. Expect more control, a longer timeline, and more decisions made under deadline.
  • Quick move-in / spec homes. The builder has already chosen the plan and the finishes. Expect a faster closing, often stronger builder incentives, and less flexibility.

Matt Horne advises buyers on both. He compares the to-be-built price, plus upgrades, against completed spec homes in the same community so the trade-off is measured in dollars and weeks, not guesses.

Roof trusses and framing on a new construction home in Columbus, GA


How Matt Horne Represents Semi-Custom New Construction Buyers, Phase by Phase

Matt Horne understands each phase of residential construction and what it involves, from the lot to the 11-month warranty walk. Here is the process he follows for buyers building a semi-custom home with a production builder.

Concrete pump pouring the foundation slab for a new construction home

Phase 1: Floor Plan Fit, Lot Selection and First-Visit Registration

  • Registration. Matt Horne attends your first model home visit, or makes sure the builder knows you have representation from your first inquiry.
  • Floor plan and structural options. Matt Horne narrows the builder's catalog to plans and structural options that fit before you fall for a lot that can't hold the footprint. Common options include a 3-car garage, covered patio, sunroom bump-out, loft vs. bonus room, main-level primary suite, mudroom drop zone, or butler's pantry.
  • Lot premium and site review. Matt Horne evaluates the lot premium, backyard slope and grading, privacy buffers, sun orientation and HOA architectural guidelines. He also checks what is planned for the undeveloped phases next door.

Phase 2: Builder Contract Review and Builder Incentives

  • The builder's contract. Builders use their own purchase agreements, not the standard Georgia or Alabama REALTOR® forms. Matt Horne reviews the deposit schedule (earnest money vs. non-refundable design deposits), the estimated completion window, the material substitution clauses and the appraisal contingency.
  • Negotiating builder incentives. Matt Horne negotiates design center credits, closing cost assistance and rate buydowns. Builders are often most flexible around quarter-end sales targets.
  • Lender comparison. Matt Horne compares the builder's preferred lender with an outside local lender side by side, to confirm that an advertised buydown or closing credit actually saves you money.

Phase 3: Design Center Appointments and Upgrade Strategy

  • Beating the showroom clock. Semi-custom builders typically give buyers one or two scheduled design center appointments and a firm deadline to finalize every tile, cabinet, countertop, flooring and electrical choice. Matt Horne helps you build a priority list before you walk in, so you don't make expensive decisions under showroom pressure.
  • "Behind-the-walls" upgrades first. Matt Horne steers your upgrade budget toward items that are hard to change later: cabinet box quality and height, countertops, shower pans and tile, flooring, recessed lighting and rough-in plumbing. He also points out the high-markup builder swaps you can easily handle yourself after closing, such as pendant lights, cabinet pulls, mirrors and closet shelving.
  • Avoiding over-improvement. Matt Horne advises buyers to keep total upgrade spending in proportion to the community's price ceiling so the home appraises cleanly and holds its resale value.

Phase 4: Independent Phase Inspections

Sheathed framing and roof trusses on a new construction home before the pre-drywall inspection

  • Optional pre-drywall inspection. Matt Horne advises buyers to consider hiring an independent inspector right after framing, windows, roofing and the rough-in plumbing, electrical and HVAC are in, before drywall closes the walls. A pre-drywall inspection can catch missing framing ties, misrouted ducts and plumbing leaks that a city or county code inspection may not, while they are still cheap to fix.
  • Final pre-closing inspection. Matt Horne recommends a full third-party inspection about 7 to 14 days before closing to check grading, drainage, attic insulation, roof flashing and the mechanical systems.

Phase 5: The Blue-Tape Walkthrough and Punch List

Open-concept kitchen, dining and living area in a completed new construction home

  • Showroom verification. Matt Horne confirms that the exact cabinet stain, tile layout, grout color, countertop edge and hardware you selected were installed as contracted.
  • Punch list. Matt Horne walks the home with you and the builder's field superintendent, marks drywall, paint, glass and door issues with blue tape, and tests every outlet, faucet and appliance.
  • Accountability in writing. Every punch-list item is documented and verified before closing. If a material is backordered, Matt Horne secures a written post-closing completion deadline.

Phase 6: The Builder's Home Warranty and the 11-Month Warranty Walk

  • Warranty roadmap. Most builders provide a home warranty, and coverage periods differ for workmanship, mechanical systems and structural elements. Matt Horne walks you through what your builder's warranty actually covers and for how long.
  • The 11-month inspection. At month 10 or 11, Matt Horne reminds you to hire an independent inspector before the first-year workmanship coverage expires. Nail pops, drywall settling cracks, grading shifts and HVAC or plumbing issues get documented while the builder is still responsible for the repairs.

Semi-Custom Homes from Smaller Builders on Individual Lots in Smiths Station and Salem, Alabama

Much of the new construction in Lee County, Alabama isn't in a formally named subdivision. It's built by smaller builders on individual lots and small clusters along county roads in Smiths Station and Salem. These homes have no model home, no design center and no sales office. You won't find them by searching a community name, because often there isn't one.

This is where Matt Horne has done most of his builder-side work. Of his 19 new construction sales, 11 were listings for builders in Lee County and Russell County, Alabama.¹ Matt Horne knows which smaller builders are working which roads. He also knows how differently their process runs:

  • Selections are often informal. A smaller builder may not have a written selections process. Matt Horne puts every finish choice in writing and attaches it to the contract.
  • Lot due diligence falls to the buyer. Matt Horne knows where to go for each piece of it, and he helps you get the survey, a soil evaluation (perc test) to confirm the lot can support a septic system, the recorded covenants or HOA documents, utility service information and county permitting details for each individual lot.
  • Inspections matter even more. Without a production builder's quality-control system, independent inspections are the buyer's best protection. Matt Horne recommends a final pre-closing inspection and can advise whether an optional pre-drywall inspection makes sense for your build.

A Semi-Custom Home in Smiths Station, Built from 2,600 Miles Away

A client relocating on PCS orders to Fort Benning from Washington State hired Matt Horne to buy a new home in Oakcreek Estates, a then-new community in Smiths Station, Alabama. The house was an empty canvas. The drywall had just gone up inside, and the exterior was ready for paint.

The builder did good work, but he had only ever built spec homes. He had no process for buyers to choose paint, flooring, tile, cabinets and cabinet colors, countertops, faucets, moldings or appliances. Selections were made verbally.

To protect his client, Matt Horne created a written specification sheet listing every one of the buyer's choices. He then added it to the purchase contract as an exhibit, signed by both buyer and builder. Matt Horne's rule: every selection goes in writing, attached to the contract and signed by every party, so it's binding.

The buyers saw the finished home in person for the first time after closing, and they loved it. Years later, Matt Horne listed and sold that same home, and it went under contract in 2 days.² The clients have since built another home on the same street and have referred many clients to Matt Horne, including military clients PCSing to and from Fort Benning.


Where Matt Horne Has Sold New Construction

Matt Horne has closed new construction sales in these locations:¹

  • Salem, Alabama (Lee County): Haley Woods, Creekside Estates, Magnolia Ridge, Rolling Hills
  • Smiths Station, Alabama (Lee County): Oakcreek, Oliver Trails, South Oaks, and individual lots
  • Phenix City, Alabama: Summerwind (Russell County) and other new construction
  • Harris County, Georgia: Mulberry Crossing and other new construction in Cataula and Ellerslie
  • North Columbus, Georgia (31904)

New Construction Communities Buyers Ask Matt Horne About

New construction buyers ask Matt Horne about these communities:

  • Columbus and North Columbus, Georgia: Heiferhorn Farms, Courtland Ridge, Townes at Grove Park, Riegel Pointe
  • Midland, Georgia: Enclave at Cartledge Creek, Charleston Place, Bowers Creek, Garrett Pines
  • Fortson, Georgia: Mulberry Grove, Mountain Point Villas
  • Waverly Hall, Georgia: Oak Ridge
  • Smiths Station, Alabama: Wisteria Cove, McIntyre Farms

Builders, floor plans and pricing change often. Call Matt Horne for current availability in any of these communities.


What Clients Say About Matt Horne

"Very good through negotiations and inspections." — Greg Johnson, Google review, June 2026

"There were multiple homes I may have bought if not for Matt's attention to detail and ability to identify potential liabilities and financial burdens." — Sean Raftery, Google review, December 2025


New Construction FAQ

Do I need a Realtor if I'm building in a new neighborhood?

Yes. The builder's sales agent represents the builder. A buyer's agent like Matt Horne represents you through contract review, incentive negotiation, independent inspections, the punch list and the warranty period. Most builders in the Columbus and Phenix City area cover the buyer's agent compensation.

Can you negotiate upgrades or design center credits with a builder?

Often, yes. Builders may offer design center credits, closing cost assistance or rate buydowns, especially near quarter-end sales targets. Matt Horne negotiates these on the buyer's behalf and checks whether a lender-tied incentive actually saves money.

What's included in the base price vs. upgrades?

It varies by builder and community. Matt Horne reviews each builder's standard features list against its design center pricing so you can compare true all-in costs, not base prices.

How much do design center upgrades cost on a new build?

Upgrade costs vary widely by builder and by finish level. Matt Horne helps buyers spend first on structural and "behind-the-walls" items and keep total upgrades proportional to the community's price ceiling.

Do I need my own inspection on a brand-new home?

Yes. Matt Horne recommends an independent final pre-closing inspection and an 11-month warranty inspection, and advises buyers to consider an optional pre-drywall inspection. A city or county code inspection checks for code minimums, not for workmanship.

Can I build a new home in Columbus or Phenix City while I'm still out of state?

Yes. Matt Horne has represented a buyer who built a semi-custom home in Smiths Station, Alabama while relocating from Washington State, and who first saw the home in person after closing.


Talk to Matt Horne Before Your First Model Home Visit

Matt Horne, REALTOR®, represents new construction and semi-custom home buyers in Columbus and Harris County, Georgia, and in Smiths Station, Salem and Phenix City, Alabama. Matt Horne is a member of the Coldwell Banker International President's Circle (top 5% of Coldwell Banker agents worldwide) every year since 2019, a KPDD Pacesetter, and a Columbus Board of REALTORS® Circle of Excellence recipient.

Matt Horne, REALTOR®
Coldwell Banker Kennon & Parker
5670 Whitesville Road, Columbus, GA 31904
706.341.9196 | [email protected]
GA License #380325 | AL License #115048


¹ New construction sales closed by Matt Horne, October 2017 through November 19, 2026. Based on information from the East Alabama Board of REALTORS® MLS (EABOR), the Columbus Board of REALTORS® MLS (CBOR) and the Lee County Association of REALTORS® MLS (LCAR). ² Days on market for the July 2023 resale, EABOR. Information deemed reliable but not guaranteed. The broker providing this data believes it to be correct, but advises interested parties to confirm before relying on it in a purchase decision. Properties may or may not be listed by the office/agent presenting the information. Each office is independently owned and operated.